- Extended Product Type: AC Drive
- Product ID : 2097-V34PR5
- Allen-Bradley Type Designation: AC Drive
Description of Allen-Bradley 2097-V34PR5 AC Drive
Part number
2097-V34PR5 is a Kinetix
300 Ethernet / IP indexing servo drive that was manufactured by Allen-Bradley. This device has an input voltage of
480 volts, three-phase and a power dissipation rating of
58 watts. The AC input voltage range for this device is from
320 volts
528 volts rms, three-phase at
480 volts nominal. Additionally, the AC input frequency ranges from
48 to
62 hertz. This servo drive offers Safe Torqu-off and does not have an integrated AC line filter.
Specifications of Allen-Bradley 2097-V34PR5 AC Drive
- Brand : Allen-Bradley
- Series : 2097
- AC input voltage : 320…528V rms three-phase (480V nom)
- AC input frequency : 48…62 Hz
- Main AC input current, Nom (0-pk) : 4.5 A
- Main AC input current, Nom (rms) : 5.5 A
- Integrated AC Line Filter : No
- Control power back-up input voltage : 20…26V DC
- Control power back-up input current, max. inrush : 30 A
- Control power back-up input current, nominal : 500 mA
- Continuous output current (rms) : 4.0 A
- Continuous output current (0-pk) : 5.7 A
- Peak output current (rms) : 12.0 A
- Peak output current (0-pk) : 17.0 A
- Continuous power output(240V nom or 120V ) : 2.00 kW
- Shunt on : 780V DC
- Shunt off : 750V DC
- Dimensions : 9.37 x 7.29 x 3.72 in (238 x 185 x 94.0 mm)
- Weight : 4.4 lbs (2.0 kg)
The 2097-V33PR5 is a single-axis servo drive that is part of the Kinetix 300 Ethernet I/P indexing servo drives. Being part of the Kinetix 300 drives, it contributes to overall cost-effectiveness as it may be installed in applications with lesser control axis. With the built-in Ethernet I/P interface, it supports modern connectivity to existing Ethernet I/P networks, enabling simplified integration.
The 2097-V34PR5 operates when provided with an external AC input voltage 480VAC, 3-phase. This drive has integrated Safe Torque-Off (STO). It has a continuous output current and power of 5.7 A and 2.0 kW respectively. For installation, the minimum installation clearance required by the 2097-V34PR5 are 3mm or 0.12 inches side clearances and 25 mm or 1.0 inches top and bottom clearance for airflow and installation. An extra 150 mm (6.0 in.) clearance must be added when the drive is installed next to noise sensitive device or equipment. Additional clearances are also required, depending on the accessories installed with the drive.
The embedded interfaces to the servo drive’s front panel are Ethernet communication port, Shunt resistor and DC bus (BC) connector, Motor feedback (MF) connector, I/O (IOD) connector, and Back-up power (BP) connector.
Reviews
There are no reviews yet.