Prosoft Modbus Master/Slave Communication Module MVI56E-MCMR
The MVI56E-MCMR Enhanced Modbus Master/Slave Communication Module with Reduced Data Block allows Rockwell Automation® ControlLogix® processors to easily interface with devices using the Modbus RTU/ASCII serial communications protocol. Compatible devices include a wide variety of instruments, process measurement devices, popular brands of programmable logic controllers (PLCs) and programmable automation controllers (PACs).
The MVI56E-MCMR acts as an input/output module on the ControlLogix backplane, making Modbus data appear as I/O data to the processor. Backplane data transfers to and from the processor are asynchronous from communications on the Modbus network. Two independently-configurable serial ports can operate on the same or different Modbus networks. Each port can be configured as a Modbus Master or Slave, sharing the same user-controlled 5000-word database.
The MVI56E-MCMR utilizes a reduced Input/Output (I/O) data block for transferring data to and from a ControlLogix processor. This reduced data block makes it ideal for use in remote rack applications over ControlNetTM. For EtherNet/IPTM applications
where bandwidth is not an issue, it is strongly recommended to use the MVI56E- MCM.
Prosoft Modbus Master/Slave Communication Module MVI56E-MCMR
Extended Product Type : ASCII
Product ID: MVI56E-MCMR
Prosoft Type Designation : ASCII
Features and Benefits
Backward Compatibility
All MVI56E products are backward-compatible allowing direct replacement of earlier MVI56 modules without the need to change existing controller programs
Enjoy Enhanced features and flexibility without incurring expensive reprogramming costs
Reduced Data Block
Reduced Data Block implementation requires less backplane/network bandwidth
Smaller data blocks are easier to schedule and transfer on ControlNet networks
Ideal solution for remote chassis installations using ControlNet and redundant controllers
CIPconnect-enabled
ProSoft Configuration Builder software (PCB), with CIPconnect, facilitates remote user access across the ControlLogix backplane through Rockwell Automation’s 1756-ENBT module
Configure, diagnose, and analyze process data and communications status
CIPconnect can bridge through multiple ENBT/CNBT links to connect to MVI56E-MCMRs installed in remote chassis for configuration and diagnostics
4-digit LED display
See critical configuration and status information without having to hook up to the ports
Specification
Backward-compatible with previous MVI56-MCMR version
Single Slot – 1756 ControlLogix® backplane compatible
10/100 MB Ethernet port for configuration with Auto Cable Crossover Detection
User-definable module data memory mapping of up to 5000 16-bit registers
CIPconnect®-enabled network configuration and diagnostics monitoring using ControlLogix 1756-ENxT modules and EtherNet/IP® pass-thru communications
Sample Ladder Logic or Add-On Instruction (AOI) used for data transfers between module and processor
4-character scrolling LED display of status and diagnostic data in plain English
ProSoft Discovery Service (PDS) software finds the module on the network and assigns a temporary IP address to facilitate module access and configuration
Personality Module (non-volatile CF card) to store all configuration settings, allowing quick in-the-field product replacement by transferring the CF card
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.