Mitsubishi MR-J5-20G-RJ AC Motion Servo Drive Amplifier MRJ520GRJ

$980.00

AVAILABILITY: Generally allow 7-10 days to ship

Mitsubishi MR-J5-20G-RJ AC motion servo drive / amplifier with built-in dynamic brake + built-in regenerative resistor + safety sub-function – Mitsubishi Electric (MELSERVO J5 – MR-J5 series) – Rated output 200W / 0.2kW – Rated current 1.8A – Supply voltage 200Vac-240Vac (200V class; 220Vac / 230Vac) / 283Vdc-340Vdc (Single-phase input (2P) or 3-phase input (3P) or DC input) – with CC-Link communication capability – IP20 – rated for 0…+60°C ambient – equivalent to MRJ520GRJ

  • Same-day shipping on in-stock items ordered by 4:00 PM Eastern
  • 1-year warranty on most products

Description

Mitsubishi MR-J5-20G-RJ AC Motion Servo Drive Amplifier MRJ520GRJ

  • Extended Product  Type: Servo Motor
  • Product ID: MR-J5-20G-RJ
  • Mitsubishi Type Designation: Servo Motor

Description of Mitsubishi MR-J5-20G-RJ AC Motion Servo Drive Amplifier

Mitsubishi MR-J5-20G-RJ AC motion servo drive / amplifier with built-in dynamic brake + built-in regenerative resistor + safety sub-function – Mitsubishi Electric (MELSERVO J5 – MR-J5 series) – Rated output 200W / 0.2kW – Rated current 1.8A – Supply voltage 200Vac-240Vac (200V class; 220Vac / 230Vac) / 283Vdc-340Vdc (Single-phase input (2P) or 3-phase input (3P) or DC input) – with CC-Link communication capability – IP20 – rated for 0…+60°C ambient – equivalent to MRJ520GRJ

Specification of Mitsubishi MR-J5-20G-RJ AC Motion Servo Drive Amplifier

  • Primary brand: Mitsubishi Electric
  • Main function: AC servo drive
  • Product series / family name: Industrial automation > Drive products > Servo systems > AC Servo drives > MELSERVO J5 series
  • Sub-range name: MELSERVO J5 – MR-J5 series
  • Functions: AC motion servo drive / amplifier, positioning mode, sine wave PWM control/current control method, point table method, safety sub-functions, 2-channel analog monitor, Safe torque off (STO), fully closed loop control, load-side encoder interface, TSN-compatible, A/B/Z-phase differential input signal, advanced vibration suppression control II, adaptive filter II, robust filter, quick tuning, auto tuning, one-touch tuning, tough drive function, drive recorder function, machine diagnosis function (including failure prediction), power monitoring function, lost motion compensation, scale measurement function, super trace control
  • Design: built-in dynamic brake, built-in regenerative resistor, safety sub-function, 2-wire or 4-wire type communication method, natural cooling
  • Supply voltage (AC): 200Vac-240Vac (200V class; 220Vac / 230Vac)
  • Supply voltage (DC): 283Vdc-340Vdc
  • Type of network: Single-phase input (2P) or 3-phase input (3P) or DC input
  • Rated current: 1.8A
  • Rated active power (kW): 200W / 0.2kW
  • Protection functions: Safety functions (STO / SS1 / SS2 / SOS / SBC / SLS / SSM / SDI / SLI / SLT) at a safety level of SIL 2 or SIL 3 (only when combined with HK-…WS servo motors), overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder fault protection, regenerative fault protection, under-voltage protection, instantaneous power failure protection, overspeed protection, excessive error protection, magnetic pole detection protection, linear servo control fault protection
  • Communication protocol: EtherCAT
  • Digital inputs: 1 x digital input (24Vdc; sink/source) (EM2)
    • 1 x digital input (24Vdc; sink/source) (LSP)
    • 1 x digital input (24Vdc; sink/source) (LSN)
    • 1 x digital input (24Vdc; sink/source) (DOG)
  • Digital outputs: 1 x digital output (rly. contact type) (ALM)
    • 1 x digital relay output (MBR)
    • 1 x digital output (rly. contact type) (INP)
  • Analog outputs: 1 x analog output (-10…+10Vdc) (MO1)
    • 1 x analog output (-10…+10Vdc) (MO2)
  • Degree of protection: IP20
  • Ambient air temperature for operation: 0…+60 °C
  • Ambient air temperature for storage: -25°C…+70 °C
  • Current consumption: 1.5A input
  • Power consumption: (drive auxiliary power consumption) 30 W
  • Order code / Manufacturer SKU: MR-J5-20G-RJ
  • Manufacturer product status: Commercialized
  • Equivalent to: MRJ520GRJ
  • Manufacturer description: J5 AMP 200W 200V ETHERCAT
  • Compliant with standard(s): CE marking, TUV Rheinland, cULus, UL, KC, EN61800-5-2, EN61800-5-1, EN61800-3, EN ISO 13849-1 PLe Cat3/4, EN62061, SILCL3, IEC61508-5-2, EN63000, UL61800-5-1, CSA, GB, KSC9800-3, KN61800-3
Recommended accessories: compatible with servo motors HK-KT053W (1.3A (with a 200Vac/400Vac amplif.)) HK-KT13W (1.2A (with a 200Vac/400Vac amplif.)) HK-KT1M3W (1.2A (with a 200Vac/400Vac amplif.)) HK-KT13UW (1.1A (with a 200Vac amplif.)) HK-KT23W (1.4A (with a 200Vac amplif.)) HK-KT23UW (1.5A (with a 200Vac amplif.)) HK-KT434W (1.3A (with a 200Vac/400Vac amplif.))
Benefits
high-speed serial communication, large-capacity communication (1Gbps), command communication cycle of ≥ 31.25μs and speed frequency response of 3.5kHz enable advanced motion control

Additional information

Weight 2 lbs
Dimensions 8 × 8 × 10 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.