Description
Mitsubishi MR-J4-200TM4-PNT Servo Motor Drive Amplifier MRJ4200TM4PNT
- Extended Product Type: Servo Motor
-
- Product ID: MR-J4-200TM4-PNT
- Mitsubishi Type Designation: Servo Motor
Mitsubishi MR-J4-200TM4-PNT AC Servo Motor Drive Amplifier
Mitsubishi MR-J4-200TM4-PNT AC motion servo drive / amplifier with multi-network interface + built-in dynamic brake + built-in regenerative resistor – Mitsubishi Electric (MELSERVO J4 – MR-J4 series) – Rated output 2000W / 2kW – Rated current 5.4A – Supply voltage 380Vac-480Vac (400V class; 400Vac / 415Vac / 440Vac) (3-phase input (3P)) – with PROFINET communication capability – IP20 – rated for 0…+55°C ambient – equivalent to MRJ4200TM4PNTSpecifications of Mitsubishi MR-J4-200TM4-PNT AC Servo Motor Amplifier Drive
- Primary brand: Mitsubishi Electric
- Main function: AC servo drive
- Product series / family name: Industrial automation > Drive products > Servo systems > AC Servo drives > MELSERVO J4 series
- Sub-range name: MELSERVO J4 – MR-J4 series
- Functions: AC motion servo drive / amplifier, sine wave PWM control/current control method, 2-channel analog monitor, Safe torque off (STO), fully closed loop control, load-side encoder interface, advanced vibration suppression control II, adaptive filter II, robust filter, auto tuning, one-touch tuning, tough drive function, drive recorder function, tightening & press-fit function, machine diagnosis function, power monitoring function, controller-peripheral operation function, scale measurement function, J3 compatibility mode, super trace control, lost motion compensation
- Design: built-in dynamic brake, built-in regenerative resistor, 2-wire type communication method, forced ventilation cooling.
- Supply voltage (AC): 200Vac-240Vac (200V class; 220Vac / 230Vac)
- Type of network: Single-phase input (2P) or 3-phase input (3P)
- Rated current: 5.4A
- Rated active power (kW): 2000W / 2kW
- Protection functions: overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder fault protection, regenerative fault protection, under-voltage protection, instantaneous power failure protection, overspeed protection, excessive error protection, magnetic pole detection protection, linear servo control fault protection
- Communication protocol: PROFINET
- Digital inputs: 1 x digital input (24Vdc; sink/source) (EM2)
- 1 x digital input (24Vdc; sink/source) (FLS)
- 1 x digital input (24Vdc; sink/source) (RLS)
- 1 x digital input (24Vdc; sink/source) (DOG)
- Digital outputs: 1 x digital output (rly. contact type) (ALM)
- 1 x digital relay output (MBR)
- 1 x digital output (rly. contact type) (INP)
- Analog outputs: 1 x analog output (-10…+10Vdc) (MO1)
- 1 x analog output (-10…+10Vdc) (MO2)
- Degree of protection: IP20
- Ambient air temperature for operation: 0…+55 °C
- Ambient air temperature for storage: -20°C…+65 °C
- Current consumption: 5.1A input
- Power consumption: (drive auxiliary power consumption) 30 W
- Order code / Manufacturer SKU: MR-J4-200TM4-PNT
- Manufacturer product status: Commercialized
- Equivalent to: MRJ4200TM4PNT
- Manufacturer description: SERVO AMP 2kW 400V J4TM PROFINET
- Compliant with standard(s): CE marking, TUV Rheinland, cULus, UL, KC, EN61800-5-2, EN61800-5-1, EN61800-3, EN ISO 13849-1 PLe Cat3, EN62061, SILCL3, IEC61508-5-2, EN50581, UL508C, CSA, KC, EAC
Recommended accessories: compatible with servo motors
HG-JR1034 (2.8A)
HG-SR1524 (4.7A)
HG-SR2024 (4.9A)
HG-JR1534 (5.4A)
HG-JR2034 (5.4A)
HG-JR734W0C (2.8A)
HG-JR1034W0C (2.8A)
HG-SR1524W0C (4.7A)
HG-SR2024W0C (4.9A)
HG-JR1534W0C (5.4A)
HG-JR2034W0C (5.4A)
Benefits
high-speed serial communication, A/B/Z-phase differential input signal





Reviews
There are no reviews yet.