Description

ABB PSE85-600-70 Soft Starter PSE8560070 ID: 1SFA897108R7000

• Extended Product Type: Motors
• Product ID: PSE85-600-70
• Product ID: 1SFA897108R7000
• EAN: 7320500400661
• ABB  Type Designation: Motors

Description of ABB PSE85-600-70 Soft Starter Motor Protector

The softstarter PSE85-600-70 has a rated maximum operational current of 85 A with an operating voltage span from 208…600 V AC. The rated control voltage is between 100…250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18…370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

Specifications of ABB PSE85-600-70 Soft Starter Motor Protector

• Rated Operational Voltage: 208 … 600 V AC
• Rated Control Supply Voltage (Us): 100 … 250 V AC
• Rated Control Circuit Voltage (Uc): 24 V DC
• Rated Frequency (f): 50/60 Hz, Main Circuit 50 / 60 Hz
• Rated Operational Power – In-Line Connection (Pe): (230 V) 22 kW, (400 V) 45 kW, (500 V) 55 kW
• Rated Operational Current – In-Line Connection (Ie): 85 A
• Service Factor Percentage: 100 %
• Overload Protection: Build-in electronic overload protection
• Integrated Electronic Overload: Yes
• Adjustable Rated Motor Current Ie: 30 … 100 %
• Starting Capacity at Maximum Rated Current Ie: 4xIe for 10s
• Ramp Time: 0 … 30 second [unit of time], 1 … 30 second [unit of time]
• Initial Voltage During Start: 30 … 70 %
• Step Down Voltage Special Ramp: No %
• Current Limit Function: 1.5 … 7xIe
• Switch for Inside Delta Connection: No
• Run Signal Relay: Yes
• By-pass Signal Relay: Yes
• Fault Signal Relay: Yes
• Overload Signal Relay: Yes
• Analog Outputs: 4…20 mA