Allen-Bradley 2097-TB1 AC Drive

• Brand : Allen-Bradley
• Series : 2097
• Type : I/O Terminal Block
• Wire size : 1.5…0.2 mm2 (16…24 AWG)
• Change in depth of drive : 11 mm
• Change in width of drive : 10 mm

Product number 2097-TB1 is am input / output (I/O) terminal expansion block. This device was designed and manufactured by Allen Bradley / Rockwell Automation. This product serves to connect the input / output to either a Kinetix 300 servo drive without employing a terminal block that is separate or an extension cable. Therefore, wiring is simplified with reduction in error that may occur during wiring as the input / output terminal expansion block is fastened to the servo drive by the aid of its own screws.

This Allen Bradley product is 50 pin input / output connector with the conducting wire size ranging from 1.5 millimeters squared (mm²) to 0.2 millimeters squared (mm²), or the equivalent of 16 to 24 American Wire Gauge (AWG). The strip length rated for this device is 5 millimeters to 6 millimeters, or the equivalent of 0.20 inches to 0.24 inches. The terminal expansion block has a torque value of 28.2 Newton-centimeters (N-cm), or the equivalent of 2.5 pound-inches (lb-in). This terminal expansion block has physical dimensions that measure 1.8 inches x 3.5 inches x 1.2 inches, or 4.4 centimeters x 8.8 centimeters x 3.0 centimeters. Additionally, this product has an approximate weight of 1.6 ounces. The temperature of the surrounding area should range from 0 to 40 degrees Celsius, or the equivalent range of 32 to 104 degrees Fahrenheit. When storing this device, the temperature should range from -10 to 70 degrees Celsius, or 14 to 158 degrees Fahrenheit. The relative humidity should have levels ranging from 5% to 95% and be non-condensing.