Allen-Bradley 2098-DSD-005-SE AC Drive

• Brand : Allen-Bradley
• Series : 2098
• I/O Channels : Eight (8) Discrete input signals; Four (4) discrete output; One (1) Normally Open (N.O.) relay contact output; One (1) Analog current limit input; One (1) Programmable analog output.
• Shunt Off : 750 Volts dc
• Continuous output power @ 480 VAC : 0.5 kW
• Continuous output power @ 230 VAC : 0.25 kW
• Output Current (Intermittent) : 2.5 Amps (0-peak)
• Output Current (Continuous) : 7.5 Amps (0-peak)
• Input Frequency (AC) :  47-63 Hz
• Input Voltage (AC) : 120 – 240 Voltage rms, 1-Phase
• Bus Overvoltage : N/A
• Nominal Input Current (AC) : 5 Amps Root Means Square
• Dimensions : 7.8 x 5.68 x 3.76 in (198.12 x 144.27 x 95.5 mm)

The 2098-DSD-005-SE Ultra 3000 Servo Drive with SERCOS Interface by Allen-Bradley is a drive designed for a wide range of motion control applications and industrial applications requiring either simple or complex motion profiles. The drive has input ratings of 100-240V AC input voltage (Single Phase) and 5A input current. The 2098-DSD-005-SE also has an output rating of 7.5A (intermittent) with a BUS capacitance of 1410 ?F and a BUS overvoltage protection at 400V DC. It has 0.5 kW power output at 230V AC with 38 Joules Energy Absorption Capability and it dissipates 48W heat when functional. Its circuit is protected by Class CC (FNQ-R-6), and Class J (LPJ-6SP) 230V AC busman fuses, and it can communicate serially via the RS-232/RS-422/RS-485 communication port. The 2098-DSD-005-SE supports SERCOS interface motion control network and interfaces via the Fibre-optic SERCOS ring with 01-99 node addresses and selectable baud rates of 4 and 8 Mbit. The drive provides motor feedback through the Incremental, Sine/Cosine, Intelligent, and Absolute encoders with 100 kHz (Sine/Cosine Input) and 2.5 MHz (TTL Input) per channel input frequencies, and utilizes the A quad B, Step/Direction, and CW/CCW input modes for Auxiliary feedback. The 2098-DSD-005-SE has an operational temperature range between 0 and 55° C (32 and 131° F) at a relative humidity range of 5-95% without condensation and is stored at a temperature range between -40 and 70° C (-40 and 158° F). It can withstand an operational shock of 15G, and a vibration of 2.5G at 10-200Hz without de-rating and it will also function without de-rating at an installation height of 1500m. The 2098-DSD-005-SE weighs approximately 1.8kg and has total dimensions of 98.1mm x 32.77mm x 65.02mm.

The 2098-DSD-005-SE is an Allen-Bradley Digital Servo Drive (DSD). This servo drive is used to interface feedback signals of servo motors to implement the configured motion and position control characteristics. This drive is part of the Ultra 3000 product family which belongs to the larger Kinetix motion control system of Allen-Bradley.

The 2098-DSD-005-SE comes with an integrated Serial Realtime Communication System (SERCOS) interface port, enabling the drive to directly communication with SERCOS enabled devices over fiber optic connection. Specifically, this drive is directly compatible with the 1756-MxxSE ControlLogix SERCOS module and the SoftLogix SERCOS communication card 1784-PM16SE.