Allen-Bradley 2098-DSD-075X-DN AC Drive

• Brand : Allen-Bradley
• Series : 2098
• Product Type : Digital Servo Drive
• Output Current (Continuous) : 75 Amps (0-peak)
• Output Current (Intermittent) : 35 Amps (0-peak)
• Input Voltage (AC) : 100-240 Voltage rms (3-Phase)
• Input Frequency (AC) : 47-63 Hz
• Bus Overvoltage :400 Volts dc
• Nominal Input Current (AC) : 30 Amp, rms
• Main AC Input Current : 30 A
• Status Indicator : Seven Segment Status LED
• Data Rate : 125KB, 250 KB, 500 KB
• Dimensions : 14.2 x 9.73 x 5.41 in (360.68 x 247.14 x 138.68 mm)

The Allen-Bradley 2098-DSD-075X-DN is an Ultra 3000i Digital Servo Indexing Drive with DeviceNet interface. It has an integral Serial communication port, supporting RS232 and RS485 communication standard and an additional DeviceNet interface for integrating the drive to DeviceNet communication network.

The 2098-DSD-075X-DN DeviceNet communication support a variety of communication rates such as 125,KB, 250 KB, 500 KB, Auto-baud and PGM setting. The integrated DeviceNet interface port is installed on the module’s front panel.

Aside from the embedded DeviceNet interface, this drive is installed with a Seven-segment fault status indicator, logic power, DC bus Shunt resistor terminal, AC supply input terminal, Motor cabling, CN2 15-pin motor feedback connector, and CN1 44-pin user I/O connector.

The 2098-DSD-075X-DN has an input voltage requirement of 3-Phase, 100-240VAC rms, with frequency of 47-63 Hz. It has a continuous output power of 7.5kW at 115VAC and 17 kW at 230VAC with Continuous Output Current 65 A and Intermittent Output Current of 150 A.