Allen-Bradley 2098-DSD-HV050 AC Drive

• Brand : Allen-Bradley
• Series : 2098
• Output Current (Intermittent) : 22 Amps (0-peak)
• Output Current (Continuous) : 11 Amps (0-peak)
• Input Voltage : 230…480V rms, 3-Phase
• Auxiliary Power Supply : Yes
• Nominal Input Current (AC) : 7 Amps Root Means Square
• Input Frequency (AC) : 47-63 Hz
• Output voltage : 230…480V rms, 3-Phase
• Input Voltage (AC) : 230-480 Voltage Root Means Square (Three Phase)
• Bus Overvoltage : 410 VDC at 230 VAC; 810 VDC at 480 VAC
• Dimensions : 9.54 x 14.2 x 5.46 in (242.2 x 360.7 x 138.7 mm)

The 2098-DSD-HV050 is a Digital Servo Drive (DSD) from the Ultra 300 series that is manufactured by Allen-Bradley. This drive is used in applications that require motion and position control. This is a stand-alone, rackless servo drive with data that can be integrated into higher control systems such as Programmable Automation / Logic Controllers (PAC/ PLC), Human-machine Interface (HMI), and Supervisory Control and Data Acquisition (SCADA) systems. This servo drive can be used to position equipment driven by a variety of servo motors such as the Kinetix MPL, Kinetix MPM, Kinetix MPF, Kinetix MPS, Kinetix TL, Kinetix MPAS, and Kinetix MPAI Electric cylinders. The 2098-DSD-HV050 electrical parameters include input supply voltage of 230 VAC / 460 VAC, 3-Phase, 50-60 Hz, and input current of 7 Amperes. This servo drive delivers an output voltage of 230 / 460 VAC, 3-Phase, programmable frequency range of 0-400 Hz, maximum continuous output current of 11 amperes, and maximum peak output current of 22 Amperes. It has a continuous power output of 2.5 kW at 230 VAC input and 5.0 kW at 480 VAC input. The 2098-DSD-HV050 front panel includes AC input power connections, DC bus connections for active shunt resistor kit, Motor power connections, Passive shunt resistor connections, Seven-segment fault status indicator, Logic power, CN3 9-pin serial port connector, and CN2 15-pin motor feedback connector. This servo drive supports the installation of a communication interface to enhance the built-in features and capabilities of this drive. These modules include Sercos interface drive, Analog drive, Digital drive with DeviceNet interface, Indexing drive, and Indexing DeviceNet interface drives.

The Allen-Bradley 2098-DSD-HV050 is a servo drive with an Input Voltage (AC) of 230 to 480 Voltage, 3-Phase, an Input Frequency (AC) of 47 to 63 Hertz, and a Nominal Input Current (AC) of 7 Amperes. It also has 11 Amperes (0-peak) Continuous Output Current and 22 Amperes (0-peak) Intermittent Output Current, all contained in its convenient 9.54 x 14.2 x 5.46 inch (242.2 x 360.7 x 138.7 millimeter) size.

The 2098-DSD-HV050 has a dedicated slot for both the RS232 and the RS485 with DeviceNet as the supported interface medium. It supports multi-turn absolute encoders to supply external logic power and maintain position during power loss. It is able to function in a temperature range of 0 to 50 degrees Celsius.

This content was written and compiled by D O Supply and should not be copied.