Allen-Bradley 2098-DSD-HV150X AC Drive

• Brand : Allen-Bradley
• Series : 2098
• Output Current (Intermittent) : 68 Amps (0-peak)
• Output Current (Continuous) : 34 Amps (0-peak)
• Input Frequency (AC) : 47-63 Hz
• Input Voltage (AC) : 230-480 Voltage rms, 3-Phase
• Bus Overvoltage : 810 V dc
• Shunt On : 800 V dc
• Nominal Input Current (AC) : 20 Amps Root Means Square
• Internal Shunt Resistance : 25 ohms
• Auxiliary Power Supply : Yes

The Allen-Bradley 2098-DSD-HV150X has an input voltage (AC) of 230-480V AC root means square (three-phase). This module has an input frequency (AC) of 47-63 Hertz and a nominal input current (AC) of 20A root means square. It also has a 34A (0 to peak) continuous output current and 68A (0 to peak) intermittent output current. The dimensions of the 2098-DSD-HV150X are 9.54 x 14.2 x 5.97 in. (242.2 x 360.7 x 151.6 mm). The weight of this module is around 10.44 kg (22.96 lbs). The 2098-DSD-HV150X also follows Electromagnetic Compatibility (EMC) standards. The Allen-Bradley 2098-DSD-HV150X has passed the EN 50081-2 EMC – Generic Emission Standard, Part 2 – Industrial Environment. This module has passed EN 50082-2 EMC – Generic Immunity Standard, Part 2 – Industrial Environment. If you are connecting or disconnecting the cable with power applied to this module or any device on the network, an electrical arc can occur.

The Allen-Bradley 2098-DSD-HV150X has internal shunt resistance of 25 Ω. The Shunt-On of this module is 800V DC. The Shunt-Off of this module is 750V DC. This module contains a set of parameters used to configure and monitor drives. This module has a faulted-node recovery feature that allows the node address of a device to be changed even when it is faulted on the network. Do not try to replace the faulty drive module circuit. You must determine the cause of the error and fix it before you try to operate the system.