Allen-Bradley 2098-IPD-005-DN AC Drive

• Brand : Allen-Bradley
• Series : 2098
• Output Current (Intermittent) : N/A
• Output Current (Continuous) : 2.5 Amps (0-peak)
• Auxiliary Power Supply : No
• Nominal Input Current (AC) : 5 Amps Root Means Square
• Input Frequency (AC) : 47-63 Hz
• Input Voltage (AC) : 100-240 Voltage Root Means Square (Single Phase)
• Bus Overvoltage : N/A
• Shunt On : N/A
• Dimensions : 4.59 x 5.69 x 8.08 in (116.59 x 144.53 x 205.23 mm)

The Allen Bradley Ultra5000 2098-IPD-005-DN is the lowest Power model, DeviceNet enabled AC Servo drive in the family of Ultra5000 Programmable, high speed, high precision, Intelligent Positioning Drives.

The 2098-IPD-005-DN is fed with a 230 Volt AC single phase input and can drive a 3-phase servo motor with a Continuous Power Output of 500 Watts, which is sufficient for driving small servo motors that are typically found in low end motion control Applications like packaging, filling, pick & place, Small CNC routers, etc.

The Ultra5000 2098-IPD-005-DN provides a plethora of GPIO with 16 optically isolated 12 to 24 Volt DC digital inputs, 7 optically isolated 12 to 24 Volt DC loads, 2 analog inputs and 2 analog outputs packed with ADCs with a -10 to 10 Volt range and 12-bits of resolution.

The 2098-IPD-005-DN can be connected to Absolute, Sine/Cosine, Intelligent, and Incremental Encoders, with a maximum frequency of 2.5 MHZ per channel in case of TTL channel signals and 100 kHz in case of Sine/Cosine Input. The capture latency of the position is less than 1.0 μs and position-based calculation can be done in small time frame as low as 125 μs