Allen-Bradley 20AB022A0AYNANC0 AC Drive

• Brand : Allen-Bradley
• Series : 20AB
• Voltage : 240V AC
• Phase : 3
• Amps : 22
• kW : 5.5
• HP : 7.5
• Frame : D
• Enclosure : Panel Mount – IP 20, NEMA/UL Type 1
• Interface Module : Blank Cover
• w/Brake IGBT : Yes
• w/Resistor : No
• Rating : Filtered A & B Frames (Optional) C, D, & E Frames (Standard)
• Network Type : None
• Control : Enhanced

Part number 20AB022A0AYNANC0 is a PowerFlex 70 variable frequency AC drive that was designed and produced by Allen-Bradley / Rockwell Automation. It has a “D” frame size and is capable of being mounted via a panel. It is designed to be linked to equipment rated for 208 to 240 volts AC three-phase power. This AC drive can manage the voltage and frequency of three-phase motors with a power output rated at 7.5 horsepower (5.5 kilowatts). The current value of this alternating current drive is 22 amperes. The 20AB022A0AYNANC0 does not have an HMI. It is equipped with a filtered IGBT braking system. There is no available feedback choice offered, and no braking resistor is included.

Both the Volt per Hertz controller and the Sensorless Vector controlling system is available for use with the Allen-Bradley 20AB022A0AYNANC0 variable frequency AC drive. This AC drive employs a sine-coded pulse-width-modulated signal with a customizable carrier frequency ranging from 2 to 10 kilohertz. It will provide a lot of torque to the engine across a broad range of speeds. Operators may utilize an LCD HMI unit for configuring and monitoring this device’s settings, alarms, etc. This is a high-efficiency device (97.5 percent efficiency at rated current) with several safeguards to protect both the drive and the motor linked to it. Part number 20AB022A0AYNANC0 has an IP20 rating and an IP 66 rating on the heat sink. This Allen-Bradley device has shipping dimensions that measure 220 mm x 350 mm x 180 mm. Additionally, this device has an approximate weight of 9.25 kilograms.