Description
Mitsubishi MR-J4-100TM4-EIP Motion Servo Drive Amplifier MRJ4100TM4EIP
- Extended Product Type: Servo Motor
-
- Product ID: MR-J4-100TM4-EIP
- Mitsubishi Type Designation: Servo Motor
Description of Mitsubishi MR-J4-100TM4-EIP AC Motion Servo Drive Amplifier
Mitsubishi MR-J4-100TM4-EIP AC motion servo drive / amplifier with multi-network interface + built-in dynamic brake + built-in regenerative resistor – Mitsubishi Electric (MELSERVO J4 – MR-J4 series) – Rated output 1000W / 1kW – Rated current 2.8A – Supply voltage 380Vac-480Vac (400V class; 400Vac / 415Vac / 440Vac) (3-phase input (3P)) – with Ethernet/IP communication capability – IP20 – rated for 0…+55°C ambient – equivalent to MRJ4100TM4EIPSpecification of Mitsubishi MR-J4-100TM4-EIP Motion Servo Drive Amplifier
- Primary brand: Mitsubishi Electric
- Main function: AC servo drive
- Product series / family name: MELSERVO J4 series
- Sub-range name: MR-J4 series
- Functions: AC motion servo drive / amplifier, sine wave PWM control/current control method, 2-channel analog monitor, Safe torque off (STO), fully closed loop control, load-side encoder interface, A/B/Z-phase differential input signal
- Design: multi-network interface, built-in dynamic brake, built-in regenerative resistor, forced ventilation cooling
- Supply voltage (AC): 200Vac-240Vac (200V class; 220Vac / 230Vac)
- Type of network: Single-phase input (2P) or 3-phase input (3P)
- Rated current: 2.8A
- Rated active power (kW): 1000W / 1kW
- Protection functions: overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder fault protection, regenerative fault protection, under voltage protection, instantaneous power failure protection, overspeed protection, excessive error protection, magnetic pole detection protection, linear servo control fault protection
- Communication protocol: EtherCAT
- Digital inputs: 1 x digital input (24Vdc; sink/source) (EM2)
- 1 x digital input (24Vdc; sink/source) (LSP)
- 1 x digital input (24Vdc; sink/source) (LSN)
- 1 x digital input (24Vdc; sink/source) (DOG)
- 1 x digital input (24Vdc; sink/source) (TPR1)
- 1 x digital input (24Vdc; sink/source) (TPR2)
- Digital outputs: 1 x digital output (rly. contact type) (ALM)
- 1 x digital relay output (MBR)
- 1 x digital output (rly. contact type) (INP)
- Analog outputs: 1 x analog output (-10…+10Vdc) (MO1)
- 1 x analog output (-10…+10Vdc) (MO2)
- Degree of protection: IP20
- Ambient air temperature for operation: 0…+55 °C
- Ambient air temperature for storage: -20°C…+65 °C
- Current consumption: 2.5A input
- Power consumption: (drive auxiliary power consumption) 30 W
- Order code / Manufacturer SKU: MR-J4-100TM4-EIP
- Manufacturer product status: Commercialized
- Equivalent to: MRJ4100TM4EIP
- Compliant with standard(s): CE marking, TUV Rheinland, cULus, UL, KC, EN61800-5-2, EN61800-5-1, EN61800-3, EN ISO 13849-1 PLe Cat3, EN62061, SILCL3, IEC61508-5-2, EN50581, UL508C, CSA, KC, EAC
Recommended accessories: compatible with servo motors
HG-JR534 (1.5A)
HG-SR1024 (2.8A)
HG-JR734 (2.8A)
HG-JR1034 (2.8A)
HG-JR1534 (5.4A)
HG-JR2034 (5.4A)
HG-JR534W0C (1.5A)
HG-SR1024W0C (2.8A)
HG-JR734W0C (2.8A)
HG-JR1034W0C (2.8A)
Reviews
There are no reviews yet.