Allen-Bradley 1756-IF16H ControlLogix Analog Input Module, Number Of Channels: 16 (Differential), Input: 0 – 20 MA, 4 – 20 MA, Voltage Rating: Overvoltage Protection: 8 VDC, Current Rating: Drawn: 200 MA At 5 V, 125 MA At 24 V, Isolation: 50 V (Continuous), Basic Insulation Type, Inputs-To-Backplane, No Isolation Between Individual Inputs, Type Tested At 1500 VDC For 60 SEC, Power Rating: Backplane: 4.02 W, Enclosure: Open Type, Rfi Suppression: Radiated: 10 V/M With 1 KHZ Sine-Wave 80% AM From 80 – 2000 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 900 MHZ, 10 V/M With 200 HZ 50% Pulse 100% AM At 1890 MHZ, 1 V/M With 1 KHZ Sine-Wave 80% AM From 2000 – 2700 MHZ, Conducted: 10 VRMS With 1 KHZ Sine-Wave 80% AM From 150 KHZ – 80 MHZ On Shielded Signal Ports, Display: Module Health, In Calibration Mode, Interface: Removable Terminal Block, IEEE, Mounting: Chassis, Temperature Rating: 32 – 140 DEG F, Environmental Conditions: Relative Humidity: 5 – 95% Non-Condensing, Vibration: 2 G At 10 – 500 HZ , Shock: 30 G(Operating), 50 G (Non-Operating), Response Time: Open Circuit Detection Time: Positive Full Scale Reading Within 5 SEC, Module Input Scan Time: 11 – 328 MS, Module HART Scan Time: Typically 1 SEC, Accuracy: Better Than 0.13% Of Range, Power Dissipation: 6 W, Impedance: Input: 249 OHM, Slot Width: 1, Surge Transient Immunity: Plus/Minus 2 KV Line-Earth (CM) On Shielded Signal Ports, Resolution: 16 – 21 Bits, Standard/Approvals: C/US UL listed, CE-ATEX marked, CE-EMC marked, C-TICK certified, GOST_R certified, KCC certified, ROSTECHNADZOR