Description
Mitsubishi MR-J4-60B4-KS020 Servo Motor Drive Amplifier MRJ460B4KS020
- Extended Product Type: Servo Motor
-
- Product ID: MR-J4-60B4-KS020
- Mitsubishi Type Designation: Servo Motor
Description of Mitsubishi MR-J4-60B4-KS020 AC Servo Drive Amplifier
Mitsubishi MR-J4-60B4-KS020 AC motion servo drive / amplifier with built-in dynamic brake + built-in regenerative resistor + safety unit compatibility – Mitsubishi Electric (MELSERVO J4 – MR-J4 series) – Rated output 600W / 0.6kW – Rated current 1.5A – Supply voltage 380Vac-480Vac (400V class; 400Vac / 415Vac / 440Vac) / 283Vdc-340Vdc (3-phase input (3P) or DC input) – with SSCNET III/H communication capability – IP20 – special coating specification (3C2) – compatible with conversion unit SSCNET of MR-J2S-[]B – rated for 0…+55°C ambient – equivalent to MRJ460B4KS020
Specifications of Mitsubishi MR-J4-60B4-KS020 AC Servo Drive Amplifier
- Primary brand: Mitsubishi Electric
- Main function: AC servo drive
- Product series / family name: Industrial automation > Drive products > Servo systems > AC Servo drives > MELSERVO J4 series
- Sub-range name: MELSERVO J4 – MR-J4 series
- Functions: AC motion servo drive / amplifier, sine wave PWM control/current control method
2-channel analog monitor, Safe torque off (STO), fully closed loop control, load-side encoder interface
speed control mode, torque control mode, advanced vibration suppression control II, adaptive filter II, robust filter, auto tuning, one-touch tuning, tough drive function, drive recorder function, machine diagnosis function, power monitoring function, super trace control, lost motion compensation
- Design: built-in dynamic brake, built-in regenerative resistor, safety unit compatibility, 2-wire or 4-wire type communication method, natural cooling, SSCNET III/H
- Supply voltage (AC): 200Vac-240Vac (200V class; 220Vac / 230Vac)
- Supply voltage (DC): 283Vdc-340Vdc
- Type of network: Single-phase input (2P) or 3-phase input (3P)
- Rated current: 3.2A
- Rated active power (kW): 600W / 0.6kW
- Protection functions: overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder fault protection, regenerative fault protection, under-voltage protection, instantaneous power failure protection, overspeed protection,
excessive error protection, magnetic pole detection protection, linear servo control fault protection
- Communication protocol: RS-422, RS-485
- Digital inputs: 1 x digital input (24Vdc; sink/source) (EM2)
- 1 x digital input (24Vdc; sink/source) (FLS)
- 1 x digital input (24Vdc; sink/source) (RLS)
- 1 x digital input (24Vdc; sink/source) (DOG)
- Digital outputs: 1 x digital output (rly. contact type) (ALM)
- 1 x digital relay output (MBR)
- 1 x digital output (rly. contact type) (INP)
- Analog outputs: 1 x analog output (-10…+10Vdc) (MO1)
- 1 x analog output (-10…+10Vdc) (MO2)Degree of protection: IP20
- Ambient air temperature for operation: 0…+55 °C
- Ambient air temperature for storage: -20°C…+65 °C
- Current consumption; 3.2A input
- Power consumption: (drive auxiliary power consumption) 30 W
- Order code / Manufacturer SKU: MR-J4-60B4-KS020
- Manufacturer product status: Commercialized
- Equivalent to: MRJ460B4KS020
- Manufacturer description: AMP 600W 200V SSCNET III/H FL CLSD LP
- Compliant with standard(s): CE marking, TUV Rheinland, cULus, UL, KC, EN61800-5-2, EN61800-5-1, EN61800-3, EN ISO 13849-1 PLe Cat3, EN62061, SILCL3, IEC61508-5-2, EN50581, UL508C, CSA, KC, EAC
Recommended accessories: compatible with servo motors
HG-SR51 (2.8A)
HG-SR52 (2.9A)
HG-JR53 (3A)
HG-SR51W0C (2.8A)
HG-SR51BW0C (2.8A)
HG-SR52W0C (2.9A)
HG-JR53W0C (3A)
LM-U2PBD-15M-1SS0 (3A)
TM-RFM006C20 (3.2A)
TM-RFM006E20 (3A)
Benefits: high-speed serial communication, A/B/Z-phase differential input signal
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.